Advertisement
@ Effect Indicator
This lights up when the effect is turned on. So, you
can easily see whether,the effect is on or off.
@ Effect Switch
This turns the effect on or off.
@® Pre-delay Time knob
@ Effect Equalizer Knob
@ Effect Level Knob
@ Power Indicator
This lights up when the unit is switched on.
@ Power Switch
This turns the unit on or off.
@ Input Jacks
Connect a musical instrument or audio equipment to
this jack.
* These are two input jacks; standard phone and pin,
but they cannot be used at the same time. If both
are connected, the standard phone jack will have
priority.
@ Level Switch
See "[3] Operation".
@ Output Jacks A
Through this jack, effect sound is sent out.
* Two output jacks can be simultaneously used.
* For monaural connection, use the standard phone
jack.
@® Output Jacks B
Through this jack, the effect sound with the inverted
modulation of the Output A is sent out.
* Two output Jacks can be simultaneously used.
@ Effect Remote Jack
By connecting the Footswitch FS-1 (optional} to this
jack, you can turn the effect on or off by pressing the
pedal.
* Before using this function, be sure to turn the Effect
switch on.
@ AC Adaptor Jacks
The "IN" jack is to connect the AC adaptor (BOSS PSA-
120, 220 or 240) or Power Supply (BOSS RPW-7).
Connect the plug of the AC adaptor or the Power
Supply to "IN". To supply power to other BOSS Micro
Studio
Series,
connect
the supplied
DC
cord
to
"OUT",
* When using the PSA Adaptor, please be sure the
total current draw does not exceed 200mA, and
when using the RPW-7, 700mA. (The current draw
of each unit is shown on its rear panel.)
Advertisement
