Advertisement
iQ
[5] NOTES
For about 10 seconds after the unit is turned on, it
does not function because of the muting circuit.
When you are using only one AC adaptor for supplying
power to more than one unt, piease be sure that
the total current draw does not exceed 200mA.
When the unit ts not to be used, disconnect the AC
adaptor from the socket.
Avord using the unit in excessive heat or humidity
or where it may be affected by dust.
Please never remove the cabinet from the unit.
When you use the unit on its own without using
the optional Rack Mount Adaptor RAD-10, please
attach the rubber feet as shown below.
m AC Adaptor, Power Supply
BOSS PSA-120, 220 or 240 (optional)
BOSS RPW-7 (optional)
Be sure to use the above AC adaptor or power supply.
Using any other adaptor or power supply will cause
trouble.
@ RACK MOUNTING
The RCE-10 is one of the BOSS Micro Studio Series,
and any two of the series can be mounted in a standard
19" rack (EIA-1U) by using the optional Rack Mount
Adaptor RAD-10.
Remove the rubber feet from the bottom of the units,
fix the units on the Rack Mount Adaptor with the
supplied screws, then place the whole set on the rack.
Advertisement
