Tower Mounting; Battery Pack Connection - Tripp Lite BP36V14-2U Owner's Manual

200209091 93-2093 Rackmount Battery Pack Owner's Manual.qxd
Installation
2-Post (Telecom) Installation
Mount the shelved sections (A) of your kit on the back
1
side of your rack. Mount them in the lowest available
space of your rack with the hardware provided (B). Note
that the support ledges should face inward.
Attach mounting ears (C) to the front mounting holes of
2
your equipment (D) using the screws provided (E). The
ears should face backward.
Using an assistant if necessary, lift your equipment
3
and slide it onto the mounting shelves. Attach your
equipment to the rack by passing user-supplied hardware
(F) through its mounting ears and into the rack rails.

Tower Mounting

Order optional adjustable tower stands, sold separately
(Tripp Lite model: 3-9USTAND) to tower mount UPS system
and battery pack.

Battery Pack Connection

BP48V242U Battery Packs have a blue 175-amp
1
polarized plug (A) on an output cord permanently
connected to the rear panel. Simply plug the output
cord directly into the external battery connector of
your UPS. (See your UPS manual for external battery
connector description and location.) Note that only
one of these Battery Packs is generally connected to a
UPS at one time. For longer runtime, you may connect
two to a single UPS using a 48V Y-Adapter Cable sold
separately by Tripp Lite, or use one or more BP48V60RT3U
Tripp Lite Battery Packs with daisy-chain capability.
BP48V212U, BP36V142U or BP72V122U Battery
2
Packs feature dual input/output receptacles on their
rear panels (B) . To connect to a UPS, insert one end
of the detachable power cable (C) into either plug on
the rear of the Battery Pack and the cable's other end
into the external battery connector of your UPS. (See
your UPS manual for external battery connector
description and location.) To connect multiple Battery
Packs to a single UPS for greatly increased runtime,
connect the output of the first Battery Pack to the
UPS's external battery connector, then "daisy chain"
the others: connect an input/output plug on the second
Battery Pack to an input/output plug on the first, a plug
on third to a plug on the second and so on. Note that
multiple Battery Pack arrays will provide longer runtimes,
but will also require longer recharge times.
B
1
D
2
F
3
1
BP48V242U
2
BP48V212U, BP36V142U or BP72V122U
4
9/23/2002 2:23 PM Page 4
A
C E
A
B
C