GE GFWN1000 Owner's Manual & Installation Instructions page 7

GEAppliances.com
Soil Level
Changing the SOIL LEVELincreases or decreases the wash time to remove different amounts of soil.
To change the SOIL LEVEL, p ress the SOIL LEVEL button until gou have reached the desired setting.
Spin Speed
Changing the SPIN SPEED changes the final spin speed of the cgcles. Alwags follow the fabric
manufacturer's care label when changing the SPIN SPEED.
To change the SPIN SPEED, press the SPIN SPEED button until gou have reached the desired setting.
Higher spin speeds are not available on certain cgcles, such as Delicates.
Higher spin speeds remove more water from the clothes and will help reduce drg time, but mag also
increase the possibilitg of setting wrinkles on some fabrics.
Wash Temp
Adjust to select the proper water temperature for the wash cgcle. The prewash and rinse water is
alwags cold to help reduce energg usage and reduce setting of stains and wrinkles.
Follow the fabric manufacturer's care label when selecting the wash temperature.
To change the wash temperature, press the WASH TEHP button until gou have reached the desired
setting. The Sanitized wash temperature is not available on certain cgcles, such as Delicates.
When selecting the Sanitize wash temperature (on some models), the washer increases the water
temperature to sanitize and kill more than 99% of mung common bacteria found in home laundrg. The
sanitize wash temperature is onlg available on Stain Wash and Whites wash cgcles. For best results,
select
the heavg soil setting when using the Sanitize wash temperature setting.
NOTE: The first !0 seconds of the wash fill is always cold. This feature assists in conditioning the fabric
and preventing stains from setting on garments.
START/PAUSE
Press to start o wash cgcle. If the washer is running, pressing it once will pause the washer and unlock
the door. Press again to restart the wash cgcle.
NOTE:If the washer is paused and the cycle is not restarted within 2 hours, the current wash cycle will
be cancelled.
NOTE:The washer performs automatic system checks after pressing the STARTbutton. Water will flow
in 45 seconds or less. You may hear the door lock and unlock before water flows; this is normal.