Panasonic CQ-VD7005N Operating Instructions Manual page 68

Electrical Connections
Names and Colors of Rear Connectors
11
!0 Power
Connector
( page 11)
a
12
CQ-VD7005N
RGB Connector
To the Panasonic Car Navigation System.
System-up Connector
To external devices equipped with system-up connector.
AV-OUT
PRE-OUT FRONT
PRE-OUT CENTER
PRE-OUT REAR
S.W-OUT
AV1-IN
AV2-IN
REMOTE-IN
(Brown/black stripe)
CAMERA-IN
REVERSE
(Violet/white stripe)
(continued)
CQ-VD7005N
(Rear)
!3 ISO Antenna
Adapter
(If needed)
(R)(Red)
Video Output Terminal (AV-OUT)
(L)(White)
Connect the rear monitor. (
(Yellow)
(R)(Red)
Pre-Out Connector (front)
To external amplifier.
(L)(White)
Pre-Out Connector (centre)
(Black)
To external amplifier.
(R)(Red)
Pre-Out Connector (rear)
To external amplifier.
(L)(White)
Pre-Out Subwoofer connector (mono)
(Black)
To external amplifier.
(R)(Red)
Video Input Terminal (AV1-IN/AV2-IN)
Connect a VCR, camcorder, other brand's car
(L)(White)
navigation system, etc.
(Yellow)
Note: When an external device is connected
(R)(Red)
to the system-up connector, the audio termi-
(L)(White)
nals, {(R)(Red), (L)(White)}, of AV2-IN are
disabled.
(Yellow)
Remote-In Lead
To Remote-Out of connected device.
Camera Input Terminal (CAMERA-IN)
(Yellow)
Connect a rear view camera (
Reverse Lead
When connecting the rear view camera, use
the reverse lead.
a page 18)
(a page 18)
page 17) .
a