H3C S9825 Series Manual page 32

The input power voltage is as required by the switch.

The console cable is connected correctly.

The configuration terminal (a PC, for example) has started, and its serial port settings are

consistent with the console port settings on the switch.
2. Power on the switch.
During the startup process, you can access BootWare menus to perform tasks such as
software upgrade and file management. The BootWare interface and menu options vary by
software version. For more information about BootWare menu options, see the
software-matching release notes for the device.
3. After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see H3C S9825 & S9855
Switch Series Configuration Guides and H3C S9825 & S9855 Switch Series Command
References.
3-31