Table of Contents
Advertisement
Figure2-25 Installing a FAN-80B-1-B fan tray on an S9825-64D switch
Removing a fan tray
WARNING!
• Ensure electricity safety and never touch the rotating fans when you hot-swap a fan tray.
• To prevent a fan from causing loud noise, do not touch the fan blades and rotation axis, even if
the fan is not rotating.
To remove a fan tray:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
2.
Orient the fan tray with the connector facing downwards. Pressing the red part of the handle
with one hand, pull the fan tray part way out of the slot. Supporting the fan tray bottom with the
other, pull the fan tray completely out of the slot along the guide rails.
3.
Put the removed fan tray in an antistatic bag.
Figure2-26 Removing a FAN-40B-1-C fan tray
2-23
Advertisement
Table of Contents
