Changing Tile On-Screen Display Language; Adding Channds M Tile Tv's Memo U; Programnfing &Annals Automatically - Toshiba 23HL85 Owner's Manual

Changing the on-screen display language
_m can choose from three different languages (English, Spanish and
French) for the on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press • or • until the Special menu
appears.
2. Press ENTER, and then press • or • to highlight Language.
3. Press ENTER, and then press • or • to select your desired
language.
iO: v00
SKIP/ SKIP/
SEA_CH _EV FF SEARCH
i i ii ii ii ii ii ii ii ii ii
__ MENU/
ENTER
AV<
Adding channels to the TV's memory
When you press CH ^ or CH v, your TV will stop only on the
channels you program into the TV's channel memory.
Follow the steps below and on the next page to program all active
channels into the TV's memory.
Programming channels automatically
_)ur TV can automatically detect all active channels in your area and
store them in the channel memo U. After the channels are
programmed automaticall> you can manually add or erase individual
channels (see page 25).
To program channels automatically:
1. Press MENU, and then press • or • until the Channel menu
appears.
2. Press ENTER, and then press • or • to highlight Auto
program.
3. Press ENTER to start auto-programming. The TV will
automatically cycle through all the TV and Cable channels, and
store all active channels in the channel memory.
Note:
• To tune the TV to a channel not
programmed in the channel memory,, you
must use the Channel Number buttons on
the remote control.
• ffyou press the ENTER button during auto-
programming, the function will stop and
only the channels programmed up to that
time will be stored in the channel memor_
Ca^v
MENU/
ENTER
AV<
4. Press CH ^ or CH v to view the programmed channels.
24