Table of Contents
Advertisement
Danfoss ECtemp™ Smart
6
Con guring
Download App
Download the Danfoss Smart™ App from App
Store or Google Play or http://heating.danfoss.com/
new-solutions/ectemp-smart.
Find WiFi name and password for the WiFi
network, that you would like to connect your
thermostat to. If in doubt contact network
administrator or internet service provider.
Identify your oor sensor type ( in kOhm).
Identify your installed heating output (in W),
from label on the heating element.
Power on the thermostat, and it will show "-"
in the display. Then it is ready to be con gured using your
iPhone and Android device.
Open the Danfoss Smart™ App and follow the instructions
and set-up ow in the App.
Danfoss ECtemp™ Smart indication
The Danfoss ECtemp™ Smart shows "–" indicating that power
is ON, but still need to be con gured.
18
Installation Guide
Advertisement
Table of Contents
