Adjusting The Zoom - Sony BURANO MPC-2610 Operating Instructions Manual

87
5. Shooting

Adjusting the Zoom

You can adjust the zoom according to the
shooting conditions.
When an E-mount power zoom lens is
attached, you can adjust the zoom using the
zoom lever on the grip remote control or a
handle (option) equipped with an MI shoe. The
zoom speed varies with the pressure applied
to the lever.
The camcorder is equipped with a zoom
function that uses image signal processing
called Clear Image Zoom. When Clear Image
Zoom is enabled, zoom is supported even for
fixed focal distance (prime) lenses. It can be
used to extend the range beyond the optical
range on a power zoom lens.
The maximum zoom ratio using Clear Image
Zoom varies depending on the recording
resolution.
• For QFHD/4K recording resolution: 1.5×
• For HD recording resolution: 2×
[Notes]
• Clear Image Zoom can be used only when the imager
scan mode (page 80) is set to S35.
• When a PL-mount lens is attached, optical zoom
operation using the zoom lever is not supported.
Clear Image Zoom is supported.
Selecting the Type of Zoom
Set the type of zoom using Zoom >Zoom Type
(page 58) in the Technical menu of the full
menu.
The type of zoom will vary depending on the
type of lens that is attached.
Attached Zoom Type setting
lens
Optical Zoom On(Clear Image
Only Zoom)
Fixed focal Zoom operation Clear Image
length using the lever is Zoom is
lens/ not supported. supported.
Manual
zoom lens
Power Optical zoom Optical zoom
zoom lens only and Clear Image
Zoom are
supported.
[Notes]
• Clear Image Zoom is not available when S&Q Motion
>Frame Rate (page 41) is higher than 60fps in the
Shooting menu of the full menu.
• Operating the SERVO/MANUAL select switch on a lens
resets the magnification of Clear Image Zoom to 1×.
Setting the Handle Zoom
Set the zoom lever setting of a handle (option)
equipped with an MI shoe using Handle Zoom
(page 58) in the Technical menu of the full
menu.
Setting the Direction of the Zoom
Ring
On some E-mount lenses, the direction of
rotation of the zoom ring can be reversed.
Set the direction of rotation using Lens >Zoom
Ring Direction (page 59) in the Technical
menu of the full menu.