Table of Contents
Advertisement
MAINTENANCE
SPARK PLUG
COOLING
SYSTEM
(See Fig. 19)
Your engine is air cooled. For proper engine performance
and long life keep your engine clean.
•
Clean air screen
frequently
using a stiff-bristled-
brush.
•
Remove blower housing and clean as necessary.
•
Keep cylinder fins free of dirt and chaff.
HOUSING
SCREEN
FIG. 19
MUFFLER
Do not operate tiller without muffler. Do not tamper with
exhaust system. Damaged mufflers or spark arresters could
create a fire hazard. Inspect periodically and replace if
necessary. If your engine is equipped with a spark arrester
screen assembly, remove every 50 hours for cleaning and
inspection. Replace if damaged.
Replace spark plugs at the beginning of each tilling sea-
son or after every 50 hours of use, whichever comes first.
Spark plug type and gap setting is shown in "PRODUCT
SPECIFICATIONS"
on page 3 of this manual.
TRANSMISSION
Once a season, lubricate the right hand side gear case
grease fitting with 1 oz. of EP #1 Grease.
CLEANING
Do not clean your tiller when the engine and transmission
are hot. We do not recommend using pressurized water
(garden hose, etc.) to clean your unit unless the gasket
area around the transmission
and the engine muffler, air
filter and carburetor are covered to keep water out. Water
in engine will shorten the useful life of your tiller.
•
Clean engine, wheels, finish, etc. of all foreign mat-
ter.
•
Keep finished surfaces and wheels free of all gasoline,
oil, etc.
•
Protect painted surfaces with automotive type wax.
13
Advertisement
Table of Contents
