Philips S3000 Manual page 16

16
English
1
2
4 Remove and clean one shaving head at a time. Each
shaving head consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
5 Remove the cutter from the shaving guard and clean
both parts under the tap.
6 Put the cutter back into the guard.
7 Put the shaving heads back into the shaving unit.
8 Put the retaining frame back into the shaving unit (1)
and turn the lock clockwise (2).