C
S
ONFIGURING
OFTKEYS
Configuring a Call Forward Key Using the Mitel Web UI
Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1 through Key 48 on the Top keys.orSelect from Key 1 through Key 30 on the Bottom
2.
keys.
In the Type field, select Call Fwd.
3.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
4.
Expansion Module Keys
Select from Key 1 through Key 84(M695).
5.
In the Type field, select Call Fwd.
6.
Click Save Settings.
7.
BLF/Xfer
: BLF/Xfer functionality can only be programmed on the top softkeys.
NOTE
The BLF key allows one or more extensions to be monitored, and once there is any state change with
those extensions, the key shows the status of the monitored lines. The Transferkey allows a call to be
transferred to other recipients blindly or consultatively. The BLF/Xfer key combines the BLF and
Transfer keys' functionality together allowing the user to transfer calls or use BLF with one key.
: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using
NOTE
the BLF/Xfer feature. For more information about this parameter, see
on
page
210.
BLF/Xfer Key Requirements and Functionality
BLF/Xfer and BLF: A BLF/Xfer key can be configured for subscribing to an extension and monitor the
•
status of the extension, similar to the BLF key functionality. Changes of the state of the monitored
extension are indicated by the key's graphical button image.
"Switch UI Focus to Ringing Line"
BLF/X
FER
124