Remote Controlling The Camera From An External Pulse Signal - Sony DXC-9000 Operating Instructions Manual

Connection to Enable Remote Control

Remote Controlling the Camera from an External Pulse Signal

The image can be captured to the built-in frame memory as
a still image using a pulse signal input to the EXT CTRL
connector from a remote sensor and switch.
Camera cable: CCXC-9DB (D-sub 9-pin)˜BNC
connectors), or CCMC-9DS (D-sub 9-pin)˜BNC, S-video
connectors)
DXC-9000
FREEZE
MENU FUNCTION DATA
UP LENS
WHITE
SOURCE BARS
DOWN
CCU
SCAN
RGB/SYNC
REMOTE
VIDEO OUT
DC IN/
EXT CTRL
VBS
DC IN/VBS
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/20/25 cable
If a CCMC cable is used, the S-video signal is also output from the
S-video output of the CMA-D2/D2MD
For information on a), b), C), see "Connecting to Video Equipment
With RGB or S-Video Inputs" on page 106.
112
RGB/SYNC



or


Camera cable CCXC-9DD (D-sub 9-pin˜D-sub 9-pin)
Sensor, switch, etc.
CMA-D2/D2MD camera adaptor
For details of the timing of the pulse input to the EXT CTRL
connector, see "Capturing the Image into Memory by Using the
Freeze Function" on page 95.
R input
G input
B input
Sync input
Composite video (BNC) or
S-video input (4-pin)
RGB/SYNC
1
Set the MODE selector
to the "1" position.
2
CAMERA (4-pin or 12-pin)
RGB monitor, multi-
scan monitor, multi-
scan printer c) , image
processor, etc.
a)
b)
Computer, image
processor, etc.
AC IN
Power cord