Audio Loop Test - Grandstream Networks GSC3510 Series User Manual

Play Mode
Play interval (s)
Time
Frequency
Playback cascade
Select the cascade role. Only cascading on the same network segment is supported and only one Master is allowed. You can set the cascade role to either "Slave", "Master", or
"None", By Default, it is set to "Slave".
Note: on GSC3510 and GSC3505 speaker models, the Cascade role can only be set to "Slave " or "None", there is no possibility to set it to "Master".
Multicast In the case of a Master Cascade role, Enter the multicast address and port. As the Master, multicast will be initiated by this address. As the Slave, it
Address will automatically obtain the address initiated by the Master.
Forwarding
This options selects the type of audio to forward. it can be Music Media , call or alarm.
Category
Playback time Configures the activation time. Up to 3 entries can be configured. When the activation time is not set, the default time is a full day.
Frequency Configures the activation frequency from Monday to Sunday. Up to 7 days can be selected. The default value is not selected.
GSC Assistant
Managed by GSC Assistant App
Device Label
Device Detection Page Definitions

Audio Loop Test

Available for the GSC3510 only
Audio loop test is used to test the three MICs available on the GSC3510. Each one of the MICs is tested separately.
If Local Music is selected: Please select local music, supporting MP3 and OGG formats.
● Single play: play the music once at the set time.
● Loop play: play music in a loop within the set time.
Configure the interval between the two playbacks. the valid range is 0-1800 seconds.
The Default value is 10 seconds.
Set the trigger time, up to 3 items can be set. Click on "+" to add more
Configures the activation frequency from Monday to Sunday. Up to 7 days can be selected. Default value is not selected.
Gives the option to add a triggering time for the Playback
Configures the ability for the device to be detectable by the GSC Assistant App.
Enabled by Default.
Defines under what label the GSC shows up during the scan.
Playback Cascade
Cascade role
Trigger Time
GSC Assistant