Dell NOT22362 Owner's Manual page 141

Table 32. System setup options—Advanced menu (continued)
Advanced
SATA/NVMe Operation mode
Adapter Warnings
Function Key Behavior
Battery Health
External USB Ports
Microphone
Camera
Internal WLAN
Secure Digital (SD) card
Fingerprint reader
Boot Disable
Camera
Battery Charge Configuration
Advanced Battery Charge Configuration
IPv4 HTTP Support
IPv6 HTTP Support
Maintenance
140 BIOS setup
operating system, handles USB devices. USB emulation is
always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI /NVMe
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Displays the battery health.
Allows you to enable or disable the external USB ports.
Default: Enabled
Allows you to enable or disable the microphone.
Default: Enabled
Enables or disables the camera.
Default: Enabled
Enables or disables the internal WLAN.
Default: Enabled
Enables or disables the SD card.
Default: Enabled
Allows you to enable or disable the fingerprint reader.
Default: Enabled
Default: Disabled
Enables or disables the camera.
Default: Enabled
Set the battery charge settings with a preselected custom
charge start and stop.
Default: Adaptive
Enable Advanced Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
Default: Disabled
Default: Disabled