7. Remove the
wireless
card.
8. Remove the fan.
9. Remove the
UMA heat sink
10. Remove the
display
assembly.
About this task
The following image indicates the connectors on your system board.
1. Fan connector
3. eDP connector
5. Memory modules
7. Keyboard-backlight FFC connector
9. Touchpad FFC connector
11. Speaker cable connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
126
Removing and installing Field Replaceable Units (FRUs)
or
discrete heat sink
(whichever applicable).
2. I/O board FFC connector
4. DC-in port connector
6. Keyboard FFC connector
8. Battery connector
10. Wireless connector
12. Solid-state drive connector