Table of Contents
Advertisement
TimeLight
(Optical display while the
programme is running) *
* depending on the features of your
t i m e L i g h t
dishwasher
While programme is running, an optical
display (additional programme
information) is indicated on the floor
under the appliance door. If the base
panel is pulled forwards or if the
appliance is installed at eye-level with
flush furniture front, the display is not
visible.
You can switch the optical display on or
off.
Infolight *
* depending on the features of your
i n f o L i g h t
dishwasher
While the programme is running, a light
spot shines on the floor under
the appliance door. Do not open the
appliance door until the light point is no
longer visible on the floor. If the
appliance door is not completely
closed, the light spot flashes *. If
the appliance is installed at eye-level,
with flush furniture front, the light point
is not visible. You can switch the
Infolight on or off.
Changing start programme *
* depending on the features of your
r o g r a m m e
C h a n g i n g s t a r t p
dishwasher
You can change the "Start programme"
setting.
Tone volume
The end of the programme is indicated
by a buzzer. You can also change this
setting.
Operating the appliance en
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can control the volume of
the signal. If you do not like the button
volume, you can switch it off.
Child-proof lock *
* depending on the features of your
C h i l d - p r o o f l o c k
dishwasher
The dishwasher features an electronic
child-proof lock. The child-proof lock
protects children from potential hazards
which the dishwasher poses.
You can switch the child-proof lock on
or off. When the child-proof lock is on, it
is difficult to open the door.
Greeting
When you switch on the dishwasher, the
brand logo appears. You can switch off
the brand logo.
Factory setting
You can reset all settings to the factory
setting.
Switching the appliance on
Turn on tap fully.
1.
Open the door.
2.
Switch on ON/OFF switch (.
3.
The Eco 45° programme has been
preset for environmentally friendly
operation whenever the appliance
starts. This programme remains
selected if no other programme
button 0 is pressed.
Press START button h.
4.
Close the door.
5.
Programme sequence starts.
29
Advertisement
Table of Contents
