Set Priority For Paging; Talkback To An Axis Device - Axis Audio Manager Pro User Manual

AXIS Audio Manager Pro
Set up paging
3.1 Go to
3.2 Click + SOURCE.
3.3 Name the paging source.
3.4 Enter a call number that corresponds to the route pattern set in the PBX.
3.5 Select a destination.
3.6 Click Save.

Set priority for paging

If you are paging to several destinations at the same time, then the one with the highest priority will be used.
Change the priority order of your destinations:
1. Go to
2. Under CONTENT PRIORITIES, click Paging.
3. Drag and drop the destinations to change their priority.

Talkback to an Axis device

It is possible to call from a SIP device to an Axis device, so that audio is communicated in both direction.
Requirements:
• A SIP device configured to your SIP server (see Paging with a 2N SIP Mic on page 15)
• An Axis device that has both a microphone and a speaker
Set up a talkback device:
1. Go to Paging sources > TALKBACK DEVICES.
2. Click + TALKBACK DEVICE.
3. Enter a name and a SIP call number.
4. To select your talkback device, click SELECT DEVICE.
5. Under Device source configuration, select a source type, input gain and an audio profile.
6. Select a priority.
7. Click SAVE.
To initiate talkback, call the SIP number of the talkback device from your SIP device.
Paging sources.
Scheduling & destinations.
18