Add And Organize Devices; Identify A Device - Axis Audio Manager Pro User Manual

AXIS Audio Manager Pro

Add and organize devices

Add and organize devices
Before you can add a device, make sure it is prepared for use. See Prepare your devices on page 5 .
A device can only be used by the system if it belongs to a physical zone. Physical zones can be created in a hierarchy. If you click a
zone and create a new zone, then the new zone will become a sub-zone. The hierarchy can be up to ten levels deep.
Before you create a zone structure, you should think about how you want to use your audio system. For instance, in a school you might
want to create one zone called "All classrooms". In this zone you could create sub-zones for each classroom. This will give you the
possibility to adjust the volume or play content in all the classrooms simultaneously by working only with the "All classrooms" zone.
1. Go to
2. If you want to create a sub zone, click the parent zone in the tree structure.
3. Click
4. To add a device to the physical zone, go to DEVICES and click + ADD.

Identify a device

You can make a device play a test tone, to make it easy for you to locate the speaker.
1. Go to Physical zones.
2. Click
To watch this video, go to the web version of this document.
help.axis.com/?&piaId=44524&section=add-and-organize-devices
Set up the zone structure for a school.
Physical zones.
to create a new physical zone.
for the device and select how long time the test tone will play.
9