Gigaset C530 IP Instruction Manual page 17

e.
Send Connections
INT1
sends calls with
Fixed Line:
4560123
Change
f.
Connection for
outgoing calls:
< IP 1
Back
Instead of a fixed connection, you can also select Sel. at each call. For each call, you can then
select a connection over which the relevant conversation should be established.
As an additional process, you can launch the connection wizard for each additional handset reg-
istered to the base. For each handset, the following will be displayed consecutively:
Assign connections to handset xxx?
¤
Carry out steps a. to f. (see above) for each registered handset.
en fr es
Ð
OK
INT 1
>
Save
Assigning an incoming/outgoing connection
The handset displays the outgoing
connection that is currently set for the
handset:
Fixed Line.
¤
To retain setting: Press the display key
§OK§
. The following step is skipped.
¤
To change the setting: Press the display
§Change§
key .
To set the connection/telephone number
that the handset should use for calling:
¤
Press right on the control key
often as required until the desired
connection is displayed (in example
IP 1).
¤
To save settings: Press the display key
§Save§
.
v
as
15