Yamaha FZ07HC 2016 Owner's Manual page 86

Periodic maintenance and adjustment
1. Bolt and washer
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
7
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
then remove the burnt-out bulb.
1
1
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
then connect the coupler.
6. Install the headlight unit as shown,
and then install the washer and
1
bolt on each side.
2
7. Have a Yamaha dealer adjust the
2
7-35
headlight beam if necessary.