Siemens SIMATIC NET RUGGEDCOM RS950G Equipment Manual page 40

IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-29
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-16
IEC 61000-4-17
IEC 60255-27
a
Siemens-specified severity levels
IEEE 1613 EMC Immunity Type Tests
Note
RUGGEDCOM products meet Class 1 requirements for copper Ethernet
configurations and Class 2 for fiber Ethernet configurations. Class 1 allows for
temporary communication loss, while Class 2 requires error-free and interrupted
communications.
RUGGEDCOM RS950G
Equipment Manual, 10/2023, C79000-G8976-1037-08
Test Description
Induced
(Conducted)
RFI
Magnetic Field
Voltage Dips
and Interrupts
Damped
Oscillatory
Mains
Frequency
Voltage
Ripple on DC
Power Supply
Dielectric
Strength
HV Impulse
Description
ESD Enclosure Contact
6.2 EMC and Environmental Type Tests
Signal Ports
DC Line-to-Line
AC Line-to-Line
Earth
Ground Ports
Enclosure Ports
DC Line-to-Line
AC Line-to-Line
Signal Ports
differential mode @ 1 MHz
DC Line-to-Line
differential mode @ 1 MHz
AC Line-to-Line
differential mode @ 1 MHz
Signal Ports 30 V Continuous, 300 V for 1 s
DC Line-to-Line 30 V Continuous, 300 V for 1 s
DC Line-to-Line
Signal Ports 2 kV (Fail-Safe Relay output)
DC Line-to-Line
AC Line-to-Line
Signal Ports 5 kV (Fail-Safe Relay output)
DC Line-to-Line
AC Line-to-Line
Enclosure Air
Test Levels
10 V
10 V
10 V
10 V
40 A/m continuous,
1000 A/m for 1 s
1000 A/m for 1 s
30% for 0.1 s, 60% for
0.1 s, 100% for 0.05 s
30% for 1 period,
60% for 50 periods
100% for 5 periods,
100% for 50 periods
2.5 kV common, 1 kV
2.5 kV common, 1 kV
2.5 kV common, 1 kV
15%
1.5 kV
2 kV
5 kV
5 kV
Test Levels
± 2 kV, ± 4 kV, ± 8 kV
± 4 kV, ± 8 kV, ± 15 kV
Certification
Severity
Levels
3
3
3
3
RUGGEDCOM-
specified
severity levels.
5
3
3
3
4
4
3
31