Philips DVP3150V/37 Service Manual page 24

10. Press [CLEAR/RESET] button on the remote
control unit.
Fig. h appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set. Then the firmware renewal
mode is complete.
11. To exit this mode, press [STANDBY-ON] button.
EXIT: POWER
Fig. h
1-11-2
BarthService
E8A20FW