Table of Contents
Advertisement
PRE-REC
This prevents you from missing a shot.
This allows recording of the pictures and sound
to start approximately 3 seconds before the
recording start/stop button is pressed.
1
Press the PRE-REC button.
[
] appears on the screen and the unit
PRE-REC
repeats the update by recording motion pictures
for about 3 seconds onto the built-in memory and
then deleting them.
≥ Aim this unit at the subject and position it
securely.
≥ Press the PRE-REC button again to cancel the
setting.
2
Press the recording start/stop
button to start recording.
≥ Images and audio are recorded for about 3
seconds before pressing the recording start/
stop button.
≥ There is no beep sound.
≥ After recording starts, the PRE-REC setting is
canceled.
≥ To use the PRE-REC function again, press the
PRE-REC button again.
≥ PRE-REC is canceled in the following cases.
jIf you operate the mode dial.
jIf you open the SD card cover.
jIf you press the MENU button.
jIf you turn the unit off.
≥ When the remaining time left for recording
motion pictures is less than 1 minute, PRE-
REC cannot be set.
≥ If you start recording less than 3 seconds after
pressing the PRE-REC button, or while the
PRE-REC indication flashes within about
3 seconds after initiating the quick start
operation, motion pictures taken 3 seconds
before pressing the recording start/stop button
cannot be recorded.
≥ When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
PRE-REC
≥ The image when pressing the recording start/
stop button appears in thumbnail view, and it is
different from the image when starting
playback.
Shooting guide
Message is displayed when this unit is moved
rapidly.
Select the menu. (l 29)
[ADVANCED] # [SHOOTING GUIDE] #
[ON]
≥ This function's default setting is [ON].
When "CAMERA PANNING IS TOO FAST."
appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message
indication.
≥ Message will not appear while pausing the
recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set
to [ON])
≥ In some recording conditions, messages may
not appear.
45
VQT1T64
Advertisement
Table of Contents
