Panasonic Digital Palmcorder PV-DV951 Operating Instructions Manual page 15

Using the Menu Screen
To facilitate the selection of a desired function or setting, this Palmcorder
displays various function settings on menus.
1 Press the [MENU] Button.
è When the [CAMERA] Lamp is on, the Camera Function Menu is
displayed. @
e When the [VCR] Lamp is on, the VCR Function Menu is displayed. @
e When the [CARD P.B.] Lamp is on, the Card Function Menu is
displayed. E)
Rotate the [PUSH] Dial to select a desired Sub-Menu.
e Rotate the [PUSH] dial to display the items highlighted.
Press the [PUSH] Dial to display the selected Sub-Menu.
Rotate the [PUSH] Dial to select the item to be set.
Press the [PUSH] Dial to set the selected item to a desired
Mode.
e Each press of the cursor >] brings up a subsequent Mode. Menu items
that cannot be used in combination with the selected item are displayed
in dark blue.
nv
om A Y
e While a Menu is displayed, you cannot record or play back. Menus can be
displayed during playback but not during recording.
ə The above operations can be carried out using the Remote Controller.
(> 10)
HEEE ` eTo display the Menu, press the [MENU] Button @ on the Remote
Controller.
eTo select items on the Menu, press the [ITEM] Button O on the Remote
eTo set the mode for the selected items, press the [SET] Button @ on the
Remote Controller.
P
S
i;
EN
3.
i.
$.
6.
A
4
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Palmcorder
is turned off. However, if the Battery or AC Adaptor is disconnected before
Tuming the Palmcorder off, the selected setting may not be retained.
PUSH MENU TO EXIT
15