Table of Contents
Advertisement
Android Functionality
Speakers
To enter the Speakers menu, press the [SOURCE] button and select TV. Then press the [MENU] button and
select Speakers using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.
Switch between speakers.
TV speakers
External Audio
System
Note: The volume level at which your set comes on at is the same level it was when turned off.
Power
To enter the Power menu, press the [SOURCE] button and select TV. Then press the [MENU] button and
select Power using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.
To enter the Power menu, press the [SOURCE] button and select TV.
Then press the [MENU] button and select Power using the [LEFT/RIGHT
ARROW] buttons and pressing [OK] when selected.
In this menu you can change the settings related to power
consumption and the following modes are available:
Sleep
Timer
Picture Off
Switch
Off Timer
No Signal
to operate auto-
power off
42
Audio will come from the
television.
Audio will come from the external
audio device (e.g. soundbar, AV
receiver) when connected via one of
the digital audio outputs.
Lets you set the sleep timer so the television
automatically switches off after a set amount of
time. Off / 10 / 20 / 30 / 40 / 50 / 60 / 90 / 120
minutes can be selected.
Allows you to turn off the display so that there
is no picture,sound still comes from the speakers.
To turn display back on, press the [STANDBY]
button on the remote control.
Controls the amount of time the set will continue
without any buttons being pressed on the set or
remote control before going into standby.
Off/ 30 / 60 / 90 / 120 / 150 / 180 / 210 / 240 minutes
can be selected. Default is off.
Controls the amount of time the set will continue
without a signal being received.
Off / 5 / 10 / 15 / 30 / 60 minutes can be selected.
15 minutes is default.
Advertisement
Table of Contents
