Input Connectors - Electro-Voice 7300 Owner's Manual

Stereo power amplifier
Hide thumbs Also See for 7300:
Table of Contents

Advertisement

Description
7300 STEREO POWER AMPLIFIER
FIGURE 2 — Back Panel View
DESCRIPTION
2.
Back Panel
Input Connectors — Located on the left side are
two 3-pin-XLR-type connectors and two balanced
quarter-inch phone jacks. The inputs can also be
unbalanced. See Figure 3 for typical input
connections.
Octal Accessory Sockets — Located above the
input jacks, accessory octal sockets are provided
for the APX crossover module. Twenty-four
crossover frequencies are available from 50 Hz
to 10,000 Hz.
Dual/Mono Bridge Mode — The mode switch
located to the right of channel 1 input selects
stereo mode or bridge-mode without any
additional patching.
Output Connectors — The speaker connectors
are heavy-duty five-way binding posts. For
protection, there is a bracket on each side of the
binding posts.
thriwi

Advertisement

Table of Contents
loading

Table of Contents