Odor Filter; Accessories; Before Using The Appliance For The First Time; Performing Initial Start-Up - Thermador T48BT110NS Use And Care Manual

6.11 Odor filter
The odor filter filters odors in the refrigerator compartment
and can be replaced if required.
→ "Replacing the odor filter", Page 25
6.12 Accessories
Only use original accessories. These are designed
especially for your appliance.
The accessories for your appliance depend on the model.
Anti-slip mat
The anti-slip mat prevents bottles and food from slipping.
Condensation may form on the anti-slip mat depending on
the type and quantity of food stored. Where necessary,
remove the anti-slip mat and wipe away the condensation
with a dry cloth.
Ethylene absorber
For important safety instructions and information about
installation and use, see the enclosed installation
instructions for the ethylene absorber.
The ethylene absorber slows down the ripening of
ethylene-sensitive fruit and vegetables to keep them
fresher for longer. Installing and resetting the ethylene
absorber → Page 19
Installing the ethylene absorber
Install the ethylene absorber in accordance with the
▶
installation instructions for the ethylene absorber.
Using the refill set
Install the components of the refill set in accordance
▶
with the installation instructions for the ethylene
absorber.
Note: Refill sets can be purchased from customer service
or our website.
Ice scoop
You can use the ice scoop to remove a portion of ice
cubes.
Before using the appliance for the first time en-us
Tip
Place the ice scoop in the variable-temperature container
or on the container divider.
7 Before using the appliance for the
Be f o r e us i n g t h e a ppl i a nc e f o r t h e f i r s t t i m e
first time
Be f o r e us i n g t h e a ppl i a nc e f o r t h e f i r s t t i m e
7.1 Performing initial start-up
Requirements
The appliance is installed in accordance with the
¡
enclosed installation instructions.
The appliance is connected to the electricity supply.
¡
→ Page 8
Switch on the appliance at the main switch.
1.
→ "Appliance", Fig.
1
Close the appliance doors, wait 3 minutes and reopen
2.
them.
Select a language.
3.
Check the water connection and the water output.
4.
Select one of the options:
5.
To set up Home Connect®, touch "Connect Now"
‒
and follow the instructions on the display.
To set the time, date and temperature unit manually,
‒
touch "Manual Set-Up" and follow the instructions on
the display.
To set up the ethylene absorber, touch "Install Now"
‒
and follow the instructions on the display.
To directly access the start screen, touch "Skip".
‒
The initial start-up is complete.
a
8 Basic Operation
Ba s i c Ope r a t i o n
Ba s i c Ope r a t i o n
8.1 Switching on the appliance
Switch on the appliance at the main switch.
1.
→ "Appliance", Fig.
1
The appliance begins to cool.
a
Set the desired temperature. → Page 14
2.
, Page 10
/
13
, Page 10
/ 13
13