Table of Contents
Advertisement
To adjust the brightness of COOLING ASSIST lamp
The brightness of COOLING ASSIST lamp can be adjusted. (P. 16)
Setting Procedure
Press
twice, then press and hold
at least 3 seconds.
●
Above setting does not affect the effect of Prime Freeze.
●
A buzzer beeps first. Press and hold the button until the setting lamp blinks.
You can lock the control panel so that the settings are not changed with unintended operation or operation by
children.
Setting Procedure
Press and hold
for at
least 3 seconds.
●
While lock function is activated and any key is pressed, "CL" appears in the notice indicator.
●
To unlock, do the same operation as above.
for
Setting
Brightness
(The setting is "3" at the time of purchase.)
To lock operation on the control panel
A beep sounds, "CL" appears in the notice indicator, and the
setting is completed.
(After a short time, "CL" disappears in the notice indicator.)
A beep sounds.
Press
to select your desired brightness.
Approx. 10 seconds later, setting is completed.
1
2
OFF
Dim
Appendix
3
Bright
23
Advertisement
Chapters
Table of Contents
