Sony CCD-TR44 Operation Manual page 18

You can use this camcorder as a VCR by connecting it to your TV for playback. It is recommended to use
the house current as the power source (p. 21).
If a VCR
is connected
to a TV
Connect the camcorder to IINE IN on the VCR by using the supplied AiV connecting cable. Set the
input selector on the VCR to 1.INE. Set the [V/VCR selector to VCP, on the TV
VIDEO OUT
AUDIO OUT
: Signal flow
VIDEO IN
AUDIO iN
Connecting Directly to a I"M
Connect the camcorder to your TV by using the the supplied A/V connecting cable. Set the TV/VCR
selector to VCR on the TV.
VIDEO IN
To Connect a 1M or a VCR without VideolAudio Input Jacks
Use the RFU-95UC RFU adaptor (not supplied).
18