Toro Titan 76501 Operator's Manual page 44

Air Cleaner Service (continued)
Servicing the Foam Element
1. Wash the foam element in liquid soap and warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Replace the foam element if it is torn of worn.
3. Lightly oil the foam element using new engine oil and squeeze out any excess oil.
Servicing the Paper Air-Cleaner Element
1. Clean the paper element by tapping it gently to remove dust.
Note:
2. Inspect the element for tears, an oily film, or damage to the rubber seal.
3. Replace the paper element if it is damaged.
Do not clean the paper filter.
Installing the Air Cleaner Elements
1. Install the foam pre-cleaner element over the
paper element.
Note:
elements.
2. Install the air-cleaner elements onto the air-
cleaner base.
3. Install the cover
retaining clamps
Maintenance: Engine Maintenance
If it is very dirty, replace the paper element with a new one.
Ensure that you do not damage the
and secure it with the
.
IMPORTANT
IMPORTANT
G451670
G456142
Page 5–6 3464-634 A