LG WASH TOWER WT1716 RK Series Owner's Manual page 52

global_main.book.book Page 52 Friday, May 12, 2023 4:36 PM
SMART FUNCTIONS
52
operation so you know how much time is left in the
cycle.
Using this function
1
Put the clothes into the drum.
2
Press the Power button.
3
Press and hold Remote button for 3 seconds to
enable the remote control function.
4
Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• Once this function is enabled, you can only start
a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• If the door has been opened, you can not start a
cycle remotely.
Disable this function manually
When this function is activated, press and hold the
Remote button for 3 seconds.
Delay End
Setting this function allows the appliance to start
automatically and finish after a specified time.
Using this function
1
Put the clothes into the drum.
2
Press the Power button.
3
Run LG ThinQ application and select the
product.
• For washing, select the washer.
• For drying, select the dryer.
4
Select a washing or drying programme.
5
Touch the Delay End and set the delay time.
6
Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• Avoid using liquid detergent for this function.
Deactivating Network
Connection
Washer
1
Press the Power button on the control panel.
2
Press and hold the Spin and TurboWash
buttons simultaneously for 3 seconds to
deactivate Network Connection.
Dryer
1
Press the Power button on the control panel.
2
Press and hold the Time Dry and Condenser
Care buttons simultaneously for 3 seconds to
deactivate Network Connection.