LG WASH TOWER WT1716 RK Series Owner's Manual page 37

global_main.book.book Page 37 Friday, May 12, 2023 4:36 PM
Using Special Options
You can customize the programmes by using the
following special options:
Steam
Adding this option helps provide better cleaning
results.
TurboWash
Adding this option reduces the programme time
but the similar washing results will be provided.
Follow the next steps to use a special
option.
1
Press the Power button.
2
Select a washing programme.
3
Change the washing programme (Temp.,
Rinse or Spin) as necessary.
4
Press the Steam or TurboWash button.
5
Press the Start/Pause button.
Prepare to Dry
Setting this function allows the the dryer to operate
automatically after the washing programme.
Follow the next steps to use a special
option.
1
Press the Power button of the washer.
2
Select a washing programme.
3
Change the washing programme (Temp.,
Rinse or Spin) if necessary.
4
Press the TurboWash button of the washer for
3 seconds.
OPERATION-WASHER
5
Press the Start/Pause button of the washer.
• When the dryer is turned, the paired drying
programme and option will be displayed.
• After the load weight is sensed, the dryer
display shows the estimated remaining dry
time for about 1 minute.
While the Prepare to Dry is in operation, the
dryer display shows
6
After the washing programme is finished, load
items into the dryer and close the door.
7
Press the Start/Pause button of the dryer.
• The dryer display shows the estimated
remaining dry time.
NOTE
• the Prepare to Dry function will not be activated
in the following cases:
- If you don't start the dryer within 15 minutes
after the washing programme has finished
- If the dryer is unplugged
- If the remote control function is used
- If the washer or dryer is shut down while
setting the Prepare to Dry function
• When the option is set, only the Power button
works and lock the door. Open the door of the
dryer after the washing programme has
finished.
Using Basic Options
You can customize the programmes by using the
following basic options:
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
37
.
PrE