■
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
■
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
5. Seat the RAM door in place and secure it with one screw.
Take care to ensure that the RAM door is firmly closed.
1. RAM door
2. screw
6. Install the battery pack - refer to
Chapter 6,
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start
System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Turn the computer off and remove all cables connected to the
computer.
User's Manual
Figure 8-3 Seating the memory module cover
Power and Power-up
Control Panel
Replacing the battery pack
Modes, if required.
System and Maintenance
Optional Devices
1
2
section in
8-6