Toshiba NB205 Series User Manual page 119

When installing Wireless LAN cards, the channel configuration is managed
as follows:
■
For wireless clients that operate in a Wireless LAN infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■
In a Wireless LAN Access Point, the Wireless LAN card will use the
factory-set default channel(printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
*1
*2
User's Manual
Table Wireless IEEE 802.11 Channels Sets (Revision B and G)
Frequency Range Channel ID
1
2
3
4
5
6
7
8
9
10
11
12
13
Factory-set default channels
Refer to the sheet Approved Countries/Regions for use for the
countries/regions that in which these channels can be used.
2400-2483.5 MHz
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457*
1
2462
2467*
2
2472*
2
C-3