Table of Contents
Advertisement
2. Setting up the monitor
Connecting to your PC
1
2
1
Power Switch
2
AC power input
3
HDMI 1 input
4
HDMI 2 input
5
Displayport input
6
Audio output
7
USB Upstream
8
USB downstream
9
USB downstream/USB fast charger
10
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
Fast Charger
9
3
4
5
6
7 8
10
USB hub
4
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Sleep and
Power Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in "ON" state, please go to OSD Menu,
then select "USB standby mode", and
switch it to "ON" state. Somehow if
your monitor reset to factory setting,
ensure to select "USB standby mode"
to "ON" state in OSD menu.
USB charging
5
This display has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon
can use these ports to charge your
Smart phone or power your external
HDD, for example. The display must be
powered ON at all times to be able to
use this function.
Some select Philips displays may not
Power or Charge your device when it
enters to "Sleep" mode (White power
LED blinking). In that case, please
enter to OSD Menu and select "USB
Standby Mode", then, turn the function
to "ON" mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep mode.
6
). You
Advertisement
Table of Contents
