Panasonic ES-ALT4B Operating Instructions Manual page 17

There are two ways to clean the shaver,
depending on the actual dirt level.
▼
To remove light dirt
3. Slide the cleaning
shutter until it clicks.
• The water inlets of the
shaver head are opened.
WATER THROUGH
4. Pour running water into
the water inlets and
rinse thoroughly, and
then turn off.
• Pour running water
into both water inlets.
• Rinse with water and
shake up and down
several times to remove
the water, and then close
the cleaning shutter.
WATER THROUGH
▼
▼
▼
To remove heavy dirt
3. Turn the shaver off and
remove the outer foil
section. (See page 18.)
4. Clean the shaver and
the outer foil section
with running water.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
▼
5. Wipe off any drops of water with a dry cloth.
6. Dry the outer foil section, the
shaver, and the trimmer completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight.
7. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each
of the system outer foils.
2. Raise the trimmer and apply
a drop of oil.
3. Switch the shaver on, and run it
for approximately five seconds.
4. Switch off the shaver, and
wipe off any excess oil from
the system outer foil with a
soft cloth.
►Notes
• Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, cracking or
discoloration of the parts.
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
▼
17