KTM 450 EXC-F 2017 Repair Manual page 49

6
6.12
FORK, TRIPLE CLAMP
Lubricating the steering head bearing
e~::·:
Q
800010-10
(EXC-F EU/AU/US)
Remove the lower triple clamp.
( Ell
p. 47)
Install the lower triple clamp.
(l!ll
p. 48)
(All EXC-F Six Days)
Remove the lower triple clamp.
( Ell
p. 49)
Instal l the lower triple clamp.
(l!ll
p. 50)
6.13 Removing the lower
tri~le clam~
(EXC-F EU/AUAJS)
Preparatory work
Remove the headlight mask with the headlight.
(Ell
p. 114)
Raise the motorcycle with the lift stand .
(IS!
p. 11)
Remove the front wheel.
(l!ll
p. 120)
Remove the fork legs.
< e
p. 15)
Remove the front fender.
( Ell
p. 1 13)
Remove the handlebar cushion.
Main work
47
I
Open the cable holder in front of the right radiat or and detach the wiring harness.
Remove screws
0
and hang the voltage regulator t o the si de.
Open the cable holder in front of the left radiator and detach the wiring harness.
Loosen screw
8 .
Remove screw
8.
- Take off the upper triple clamp with the handlebar and set it aside.
• Info
I
Cover the components to protect them against damage.
Do not kin k the cab les and lines.
Remove 0-ring
8
and protective ring @» .
- Take off the lower triple clamp with the st eering st em .
Remove the upper steering head bearing.