KTM 450 EXC-F 2017 Repair Manual page 124

14 WHEELS
Main work
Remove shaft seal rings
0
and
8 .
Press out bearing
8
using a suitable tool.
• Info
I
Spacing tube
e
can be pushed aside.
Remove spacing tube
8 .
Press out bearing
@)
using a suitable tool.
Press in the new bearing
@)
all the way using a suitable tool.
• Info
I
On ly press the bearing in via the outer ring otherwise the bearing wi ll be
damaged when it is pressed in.
Position spacing tube
8 .
Press in the new bearing
8
all the way using a suitable tool.
• Info
I
On ly press the bearing in via the outer ring otherwise the bearing wi ll be
damaged when it is pressed in.
Grease new shaft seal rings
8
and
0
and press in until they are f lush.
Finishing work
Install the front whee l. (!!;!!! p. 120)
122