KTM 450 EXC-F 2017 Repair Manual page 116

13 MASK, FENDER
v
Mount and tighten screws
8.
Guideline
Remaining screws , chassis
(All EXC-F Six Days)
M6
Position the front fender. Mount and tighten screws
0 .
Guideline
Remaining screws , chassis M6
Mount and tighten screws
8 .
Guideline
Remaining screws, chassis M6
Finishing work
Install the headlight mask with the headlight. (!li p. 115)
- Check the headlight setting.
( S
p. 151)
(EXC-F EU/AU, EXC-F Six Days EU)
Switch off all power consumers and switch off the engine.
10 Nm
(7 .4 lbf
ft)
10 Nm
(7.4 lbf
ft)
10 Nm
(7 .4 lbf
ft)
Detach the brake line and w iring harness from the headlight mask.
114
Release rubber bands
O .
Slide the headlight mask up and swing it forward.
Detach plug-in con nectors
8
and take off the headlight mask with the head-
light.