8. Do not pinch the wires (I, J, K, 83, 98) during
this step. Attach the console assembly (L) to
the handrail assembly (G) with four 5/16" x 1"
Screws (4) and four 5/16" Star Washers (7);
start all four Screws, and then tighten them.
Next, connect the Handrail Wire (83) and the
primary console wire (I) to the matching console
wires (J). IMPORTANT: Slide the wire connec-
tors together until they snap into place with
an audible click.
Then, connect the two Ground Wires (98, K).
9. Do not pinch the wires during this step.
Press the Console Cover (96) onto the back of
the console assembly (L) until all four corners
snap into place; it may be helpful to lightly hit the
corners of the Console Cover with the palm of
your hand.
8
98
7
K
83
I
9
L
12
L
J
7
4
4
G
96