True SPL0900 Owner's Manual page 34

STEP 5—ATTACH ACRYLIC SHROUDS TO UPRIGHT ASSEMBLY
NOTE: Supplemental acrylic shroud video available on vimeo.com: https://vimeo.com/723539522?share=copy.
NOTE: Supplemental metal shroud video available on vimeo.com: https://vimeo.com/774417897?share=copy.
TOOLS NEEDED
Allen Wrench
Flat Head Screwdriver
Rubber Mallet
Socket Wrench
Wrench
a. Using an allen wrench, socket wrench or open end wrench, and a fl at head screwdriver, remove and set aside the
shroud fasteners from the upright assembly using 4 hex screws, 4 lock nuts, 2 twist lock screws, and 2 lock washers.
4
34
ITEM PART
1 SPL-09-UPR200X
2* SPLSRDPS*
3* SPLSRDMS*
4 C 603A
5 C 900E
6 D2157
7 D2158
*Acrylic or metal shrouds are dependent on the confi guration that was ordered.
5
DESCRIPTION
UPRIGHT ASSEMBLY
SHROUD SET SHORT ACRYLIC, SPL
SHROUD SET, SPL, SHORT METAL
SHCS, 10-32, 1/2" BLK
LOCK NUT, 10-32, NYL INS BLK
SCREW, TWIST LOCK
LOCK WASHER
1
QTY
1
1*
1*
4
4
2
2
7
6