Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings; Remote Start - Bosch WAX32K41AU User Manual And Installation Instructions

Hide thumbs Also See for WAX32K41AU:
Table of Contents

Advertisement

16.3 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold Remote Start 
1.
approx. 3 seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start/Reload 
3.
until the display shows On.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.4 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start 
1.
at least three seconds.
Set the programme to position 4.
2.
a The display shows Con.
Press Start/Reload 
3.
until the display shows OFF.
a Wi-Fi is deactivated.
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.5 Resetting the appliance
network settings
Press and hold Remote Start 
1.
at least 3 seconds.
Set the programme to position 5.
2.
a The display shows rES.
Press Start/Reload 
3.
a The display shows YES.
Press Start/Reload 
4.
a The network settings are reset.
for
repeatedly
for
repeatedly
for
.
.
a If End is shown on the display, the
network settings are reset.
16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
¡ Start/Reload 
¡ Remote Start 
¡ The appliance is switched off.
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Press Remote Start  .
a Remote Start 
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press Remote Start  .
a Remote Start 
16.7 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
Home Connect en
is pressed.
is pressed.
lights up and the
goes out.
35

Advertisement

Table of Contents
loading

Table of Contents