Page 2
The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
Page 3
Preface The H3C vAC1000 virtual access controller documentation set describes the software features for the vAC1000 virtual access controller and guide you through the software configuration procedures. These guides also provide configuration examples to help you apply software features to different network scenarios.
Page 4
Convention Description example, the New User window opens; click OK. Multi-level menus are separated by angle brackets. For example, File > Create > > Folder. Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury.
Page 5
It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device. Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
About cloud connections ···································································································································· 1 Multiple subconnections ····························································································································· 1 Cloud connection establishment ················································································································ 1 Configuring the H3C Oasis server ····················································································································· 2 Configuring the local device ······························································································································· 2 Unbinding the device from the Oasis server ······································································································ 3 Display and maintenance commands for cloud connections ············································································· 4 Cloud connection configuration examples ·········································································································...
About cloud connections A cloud connection is a management tunnel established between a local device and the H3C Oasis server. It enables you to manage the local device from the H3C Oasis server without accessing the network where the device resides.
Configuring the local device About this task You can specify a domain name for the H3C Oasis server and log in to the server through the domain name on a remote PC to manage the local device. For a device to establish a cloud connection to the Oasis server, perform either of the following tasks: •...
Configure the domain name of the H3C Oasis server. cloud-management server domain domain-name By default, the domain name of the H3C Oasis server is not configured. (Optional.) Specify a backup H3C Oasis server by its domain name. cloud-management backup-server domain domain-name By default, no backup H3C Oasis server is specified.
2, and configure a routing protocol to make sure the devices can reach each other. (Details not shown.) Log in to the H3C Oasis server to add the serial number of the AC to the server. (Details not shown.) Configure the domain name of the H3C Oasis server as oasis.h3c.com.
Page 11
Verifying the configuration # Verify that the AC and the H3C Oasis server have established a cloud connection. [AC] display cloud-management state Cloud connection state : Established Device state : Request_success Cloud server address : 139.217.27.153 Cloud server domain name : oasis.h3c.com...