Download Print this page

Macro-Shooting - Canon AUTO ZOOM 814 ELECTRONIC Instructions Manual

Hide thumbs Also See for AUTO ZOOM 814 ELECTRONIC:

Advertisement

27
Macro-Shooting
The Canon Auto Zoom 814 Electronic has a built-in macro-shooting
system and you can easily take super close-up pictures without using any
accessories. Make use of it to shoot small insects, animals, flowers, or
titles.
1
Normally, the zooming ring cannot be turned beyond 7.5mm. To use
the marco range, pull out the zooming lever and you will
be
able to
rotate the zooming ring to the macro range.
2
Look through the viewfinder and focus on the subject.
As
it is
rathe~
difficult to focus with the focusing ring, adjust focus by rotating the
zooming ring within the area of
"MACRO".
3
Blurs are especially unpleasant in macro pictures. It is advisable to
keep the camera steady by mounting it on a copy stand or on a tripod
and to use the Remote Switch 60 in these cases .
• Be sure to attach the eyepiece cover to prevent reverse incoming light
when the eye is not against the eyepiece.
Otherwise,
direct light may enter
from the eyepiece and cause ghosts in the film .
• In macro shooting, it is advisable to select the aperture between f/5.6 and
f/11 by adjusting light intensity.

Advertisement

loading