Advertisement
Quick Links
SERVICE MANUAL
System
Power Amplifier:
TA-FA3ES
AEP Model
SPECIFICATIONS
Pure-complementary SEPP MOS
FET power amplifier with all stages directly coupled
Outputs
Output level / impedance
REC OUT 1, 2: 150mV,lkilohms
PHONES: 10 mW (at 8ohms)
ee
POVEROIS high-gain a
nated eas!
Tonexontiols
BASS (100Hz): +7dB
os section: Large-capacity power supply advance
TREBLE (10kHz): +6dB
Speakers impedance
4 to 16 ohms
Eomel consumpuon
200W
Output bandwidth (8 ohms) 10Hz to 100kHz (at 40W output, and
Dimensions (approx.)
430 x are * a7
high-frequency distortion rate of
(wihid)
(17 x 5 */s x 14 7/s inches)
0.08%)
incl. projecting parts and controls
Dynamic headroom
at 4 ohms: 2dB
Mass (approx.)
10.0kg (221b loz)
Total harmonic distortion
Damping factor
Intermodulation (IM)
distortion (60Hz:7kHz=4:1)
Throughrate
Residual noise
Equalizer deviation
Frequency response
S/N
Inputs
Input sensitivity and
impedance
Maximum input capability
(1 kHz)
at 8 ohms: 1.2dB
0.008% (at 8 ohms, 10W output)
100 (8 ohms, 1kHz)
0.008% (8 ohms)
125 V/u
sec, 250 V/
sec (Inside)
Less than 100 nV (network A)
PHONO MM: 20Hz to 20kHz,
+0.2dB
TUNER, CD, AUX, TAPE 1, 2:
5Hz to 100kHz *$dB
PHONO MC: 77GB (A Fil, 0.5mV)
MM: 95dB (A Fil, 5mV)
TUNER, CD, AUX, TAPE1, 2: 105dB
PHONO
MC: 0.17mV, 1000hms
MM: 2.5mV, 50kilohms
TUNER, CD, AUX, TAPE 1, 2:
150mV, 20kilohms
PHONO
MC: 9mV
MM: 150mV
Supplied accessories
|§ Remote commander (remote)
RM-S702 (1)
Sony batteries SUM-3(NS) (2)
Design and specifications are subject to change without notice.
INTEGRATED STEREO AMPLIFIER
SONY.
Advertisement
