Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual page 35

MANUAL
FOCUS
Use Manual Focus (MF) when :
* recording through glass.
e lighting is poor.
* subject is far away with objects in foreground.
* subject has distinct horizontal lines.
Macro Focus (close-ups) B
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
Camcorder automatically focuses on
subject even during zooming.
Auto Focus is on when "MF" is not
displayed in EVF or LCD monitor. Push
MANUAL FOCUS to remove "MF" in EVF
or LCD monitor if necessary.
* subject is not centered in EVF or LCD monitor.
* Subject has shiny surface.
* subject is slanted.
"e subject is bright and flat, like a white wall.
* subject has fast motion, like a golf swing.
1 Push MANUAL FOCUS so "MF"
(Manual Focus) appears in EVF or
LCD monitor.
EVF or LCD Monitor
2 Hold down "T" (telephoto) on
POWER ZOOM to maximum zoom
in.
3 Turn MANUAL FOCUS until subject
is in focus.
* Back away from subject if necessary.
d Hold down "W" (wide angle) on
POWER ZOOM as desired.
* Refocus as needed
when aiming at new scenes.
Auto Focus functions-up to 12.7 mm (1/2 inch) from subject.
Hold down "W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
pa
" : $
= J3 -
> maat E Deg
h
35