Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual page 42

when:
"repe
Before you begin...
* Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
* Insert cassette with record tab (page 15).
* Set POWER to CAMERA.
* Securely position and aim Camcorder.
1 Press MENU for MENU mode.
Press UP A or DOWN "V to select
SECURITY d .
CO DOWN
vw
DISPLAY MENU
PAGE 2/2
PLAY 7 ON
DEMO ; OFF
; OFF
VIDEO EFFECTS ; FADE
BLACK
2 Press DISPLAY to select ON.
3 Press MENU to exit. (If cassette is
not inserted, "gg" will flash.)
MOTION MOTION
Motion Security may mistakenly start SECURITY SECURITY
* background is plain, like a white wall, or
has distinct vertical, horizontal, or slanted
stripes, like a venetian blind. * Recording will start about 3 seconds
* brightness suddenly changes. after motion is detected.
* Date and time are recorded if
Motion Security may not start when: displayed in EVF or LCD monitor
* motion is very slow or fast.
* moving object is very small. (page 21 ).
* motion occurs only in 1 corner of viewing * Recording stops about 30 seconds
area. after motion ceases.
* in poor lighting (in this case, MOTION
SECURITY flashes). l To cancel Security Mode, set POWER to
* background is plain, like a white wall, or OFF.
has distinct horizontal or vertical stripes.
Note:
* Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
- recording.
* While in Security stand-by, the
following functions are not available: Record/
Pause, Stand-by mode, Digital E.1.S., Video
Effects (Auto/Digital Fade).
For assistance, please call : 1-800-211-PANA(7262)
42 or send e-mail to : consumerproducts @ panasonic.com