Connection Notes - Sony MU-A400 Operating Instructions Manual

Connection Notes.
On power sources
* Use an extension cord that can bear 10A current.
* Do not connect many pieces of equipment to the same AC
outlet.
| Using the Unit as a Stereo Amplifier"
OPERATION switch on
STEREO
Mixer, preamplifier, etc.
10
Impedance
more than 4 ohms
On connecting cables
¢ The power cord should be connected last. First make sure
that the POWER switch is turned off.
* The cable connectors should be fully inserted into the jacks.
A loose connection may cause hum and noise.
* Unplug the cord from the wall outiet by grasping the plug.
Never take out the plug by pulling on the cord. _
Speaker
Speaker
Impedance
more than 4 ohms